• Home
  • What's EDSFair
  • Exhibitors
  • Exhibitor Seminar Search
  • Special Stage
  • Special Zone
  • FPGA/PLD Design Conference
  • Access / Accommodation
  • Press Room
  • Contact

 Exhibitor Detail : Tokushu Denshi Kairo Inc.
010 

Tokushu Denshi Kairo Inc.
World First Japan First New Product

Exhibit introduction

1 MITOUJTAG
MITOUJTAG is the debug tool for FPGA. It makes the signals on the board visual and touchable.

Unlike the other FPGA debugging tools, MITOUJTAG is usable before configuration.Because it does not use an internal resource of FPGA at all. And since it supports all device which have JTAG, not only FPGAs but also CPLDs , CPUs and ASICs.

Although today's electronic circuits get more high-density , and it became difficult to observe the signal on the board, it gets possible to watch state (H/L/ input / output) of the I/O terminal on the screen of the PC in real-time by using MITOUJTAG.

Only connecting JTAG signals, you can watch the all signals of the backside of the BGA package very clearly which is not watchable with the conventional oscilloscope or logic-analyzer. And even overriding the operation of FPGA without logic synthesis and re-configuration is possible.

2. The Spartan-6 FPGA Evaluation Board
"TKDN-SP6-ES" is an FPGA evaluation board which use the XILINX Spartan-6.

Features.
* Name card size (72mm x 50mm)
* On board USB2.0 Interface (Actual transfer speed is 320Mbps. Very fast!)
* On board 512Mbit DDR2 SDRAM, and IP core is included.

For expansion I/O connector, 2.54mm pitch traditional pin header is adopted. It does not use the FMC (FPGA Mezzanine connector) which is inconvenient for the handling.
You can easily expand and make custom embedded system immediately with universal board.


Contact info

President
TEL:03-3253-0525
FAX:03-3253-0526
E-mail:info@tokudenkairo.co.jp
URL:http://www.tokudenkairo.co.jp

Address

Excel Kanda 4A
28 KandaHigashiMatsushita-cho Chiyoda Tokyo
101-0042

Back to exhibit list